Metal surface decoration drawing according to need, can be made into straight lines, lines, spiral lines and several thread ripples.

A straight line wire drawing, refers to the metal plate surface by mechanical friction processing method of straight lines. It has a brushed metal surface scratches and decorative metal surface of the dual function. Linear drawing a continuous wire lines and interrupted threads two. Continuous wire lines available 100 clean cloth or steel brush on metal surface through continuous horizontal friction acquisition. Change to stainless steel brush wire diameter, can obtain different thickness of lines. Intermittent lines silk in the brush machines prepared. Principle: using two groups of rotating in the same direction differential wheel, on the group for rapid rotation of the roller, transfer roller group is slow, aluminum or aluminum alloy plates from two groups of roller in the after, brush out the delicate intermittent Z straight lines.

Two, chaotic pattern drawing is the high-speed wire brush, so that the metal moving around the friction the obtained a no rules, no obvious texture calendering lines. The processing of metals on the surface, higher requirements.

In three, corrugated general brushing machines and wiping machine production lines. On the use of group of roller axial movement, in the metal surface grinding brush, draw wavy lines.

Rotary profiling also known as rotation, is a cylindrical felt or grind stone nylon wheel is arranged on a drill press, kerosene and polishing paste, on the metal surface rotating polishing acquired a silky texture. It is used for a circular plate and small decorative panel decorative processing.

In four, the thread is a station on the shaft is provided with a circular felt a small motor, which is fixed on the desktop, and the edge of the table into 60 degrees angle. Don't do a fixed metal strip in a carriage, carriage stick straight edge Qi polyester film used to limit the width of thread. Through the felt to rotate with the carriage to move in a straight line, in the metal surface rotary erase width consistent thread lines.